CRT(TM) 3.4.7 (Official) -- November 7, 2002 Copyright © 1995-2002 VanDyke Software, Inc. All rights reserved. This file contains a CRT product history. It includes lists of new features, changes, and bug fixes sorted by release. For a product description, installation notes, registration and contact information, please refer to Readme.txt (downloaded with this installation). Changes in CRT 3.4.7 (Official) ------------------------------- Bug fixes: - Using the SAM tool on HP-UX resulted in screen artifacts due to an emulation error related to the handling of the cursor position. - Changes to the session config for the current session were not being saved. Changes in CRT 3.4.6 (Official) ------------------------------- Changes: - Restored pre-3.4 ability to set logical and physical window sizes independently. - Changed the default VT100 keymap from "VT100" to "Default". Bug fixes: - CRT crashed when the Confirm Disconnect dialog was closed while a timeout dialog was up. - If the Auto reconnect option was on, the session would reconnect after a manual disconnect. - The Reconnect button did not work if the session being reconnected to was the auto session. - Zmodem uploads hung when the user did not have read access to the file being uploaded. - Auto reconnect was not attempting to reconnect in some cases. - CRT could hang when using telnet and pressing CTRL+C while a large amount of data was being sent to the screen. - Toggling the NUMLOCK key did not work properly. - Telnet and rlogin: Sessions could display an unformatted error. Changes in CRT 3.4.4 (Official) ------------------------------- Changes: - Added Xmodem category to the Session Options dialog, which allows the packet size to be set to 128 bytes or 1024 bytes for Xmodem uploads. Changes in CRT 3.4.3 (Official) ------------------------------- Bug fixes: - If the "Scale the font" option was set, the font was not scaled when the terminal was switched from 80-column mode to 132-column mode. - Attempts to underline text by overprinting during pass-through printing only showed the underline characters. - When the "Narrow font" option was set in the Session Options, the normal font type was changed to the narrow font type after using narrow font mode. Changes: - In order to be more compatible with the JAWS screen reader accessibility software, the cursor style can now be changed when the "Use trackable insertion carat" option is set. Changes in CRT 3.4.2 (Official) ------------------------------- Bug fixes: - When "Use auto session" was set, changes made to the session configuration were not saved. Changes: - Added the euro symbol to the VT100 fonts as character 0x80. - The license text in the About box is now selectable. Changes in CRT 3.4.1 (Official) ------------------------------- Bug fixes: - Hold Screen mode was not being cleared on disconnect. - In VT220 emulation 8-bit mode, the escape sequences CSI, IND, RI, and NEL could be ignored. - When running a VBScript that sent the output to the remote machine, CRT crashed if non-zero values were used for line or character send delays values. - In keymap files, comments could not be on the same line as a key assignment. Changes in CRT 3.4 (Official) ----------------------------- Bug fixes: - When "Scale the font" was enabled, the last row in the window was cut off for certain TrueType fonts. - When receiving large amounts of data from the remote server, some data received was written multiple times for both ASCII receive and raw logging. - Under Windows XP, when a roaming profile was used, CRT would fail to create the configuration data folder. Changes in CRT 3.4 (beta 3) --------------------------- New features: - Added a global accessibility option to use a trackable insertion caret. Turning on this option allows screen magnification programs to track the position of the caret. - Added a new toolbar button that launches AbsoluteFTP if it is installed. Bug fixes: - When the ANSI escape code (ESC, C) was used to reset the terminal, the line wrap emulation mode was always turned off. During a soft reset, the emulation modes are now set to the initial values. - Zmodem transfers failed using Omen Technologies sz with -e option. ZDLE+l and ZDLE+M escape sequences for 0177 and 0377 are now handled. - When the "Scale the font" option was on, there were display problems for some TrueType fonts such as Courier New and Andale Mono. - Sessions that were started in a minimized state and had the "Synchronize view to size" option turned on could have problems when the window was resized. - Send strings could not contain embedded quotes. - The blinking cursor stopped blinking if focus was moved to the chat window and back again. - The "Open Selection as URL" context menu item was available when the mouse was clicked above or below the current selection. Changes in CRT 3.4 (beta 2) --------------------------- Changes: - In the Color Schemes category of the Global Options dialog, the list containing the color schemes is now sorted. - Added three new commands to the Help menu to go to the CRT web page, the CRT order page, and the CRT download page. Bug fixes: - Color scheme was case sensitive. This applied when adding a new color scheme and when the color scheme is passed on the command line. - When the "Scale the font" option was on, if the user pressed OK from the Font dialog without making any changes, the font sometimes changed, causing the window to resize. Changes in CRT 3.4 (Beta 1) --------------------------- New features: - Telnet: Added support for sending a NO-OP to the server at a specified interval to prevent idle timeouts. - Telnet: Added NTLM authentication. - Added an option to scale the font size (instead of changing the number of rows and columns) when the application window is resized. - Added Reconnect dialog, displayed prior to auto-reconnecting, that provides the option to cancel the reconnect. - Added VT220 support for programming the function keys with an escape sequence. - Added /COLOR_SCHEME command-line option. Changes: - Changed F1-F5 in the Linux keymap to reflect the mappings required for Midnight Commander. - Added option to change the configuration folder. - The keyboard emulation is now selected automatically depending on the terminal emulation. It can be overridden using the "Select an alternate keyboard emulation" option. - "Suspend output" is displayed in the status bar if the user presses CTRL+S when local flow control is on. - "Hold screen" is now displayed in the status bar when the VT_HOLD_SCREEN command is sent (mapped to the F1 key in the VT220 keymap) until it is sent again. - In the Connect dialog, now opens/closes the selected folder. - Character and line send delays are now applied to "Automate Login" scripts. - Activator: When Explorer is restarted, the Activator tray icon is re-added to the tray. Bug fixes: - Scrolling performance was slow under Linux (especially directory listings). - The Help window was always on top of its parent CRT window. - Flashing text was sometimes invisible when the CRT lost focus. - CRT did not respond properly to the DEC exit vt52 mode command (ESC <). - When "Auto reconnect" was enabled, a crash could occur when trying to close a window that could not reconnect. - Under Windows 2000, CRT crashed after startup when a LAN printer resource was unavailable. - Excessive warning dialogs were displayed, especially during port forwarding or when using "Auto reconnect". - CRT crashed when running a script that sent enough data to overflow the TCP window. - In order to avoid a clipboard deadlock problem (most notably under Windows Terminal Server), the method CRT used to detect data on the clipboard was changed. - In the options dialogs, the path for the currently specified file was not always used when the File Open dialog was displayed. - Character cells that were marked with the INVISIBLE graphics attribute would be printed when Print Screen was selected. - Added support for the ANSI back-tab escape sequence, CSI n Z. - Due to a keymap problem, local flow control was broken. - "Open Selection as URL" failed when using column select.